| Dimensions W x L x H | 45 mm x 170 mm x 35 mm |
| Diagnostics via LED | Buffer error LED (BF)Diagnostics per modulePower supply for electronics/sensorsLoad power supplySystem diagnosticsMaintenance required |
| Diagnostics via bus | APDD invalidLoad switch-offCommunication with AP module interruptedElectronics/sensors overvoltageLoad overvoltageElectronics/sensors undervoltageLoad undervoltage |
| Configuration support | GSD file |
| Reverse polarity protection | yes |
| Max. number of modules | 56 |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 80 mA |
| Intrinsic current consumption at nominal operating voltage load | Typically 5 mA |
| Note regarding operating voltage | SELV/PELV fixed power supplies requiredNote voltage drop |
| Max. power supply | 2 x 4 A (external fuse required) |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Nominal operating voltage DC load | 24 V |
| Power failure buffering | 10 ms |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Permissible voltage fluctuations load | ± 25 % |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, type of connection | Plug |
| Power supply, connection technology | M8x1, A-coded as per EN 61076-2-104 |
| Power supply, number of pins/wires | 4 |
| Voltage forwarding, function | Outgoing electronics/sensors and load |
| Voltage forwarding, connection type | Socket |
| Voltage forwarding, connection technology | M8x1, A-coded as per EN 61076-2-104 |
| Voltage forwarding, number of pins/wires | 4 |
| Certification | RCM compliance mark |
| KC characters | KC EMC |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Corrosion resistance class (CRC) | 1 – Low corrosion stress |
| Storage temperature | -40 °C … 70 °C |
| Relative air humidity | 5 – 95 %Non-condensing |
| Degree of protection | IP65IP67 |
| Note on degree of protection | Unused connections sealed |
| Ambient temperature | -20 °C … 50 °C |
| Product weight | 186 g |
| Max. address capacity outputs | 244 byte |
| Max. address capacity inputs | 244 byte |
| Fieldbus interface, galvanic isolation | yes |
| Fieldbus interface, transmission rate | 1.5 Mbit/s12 Mbit/s187.5 kbit/s19.2 kbit/s3 Mbit/s500 kbit/s6 Mbit/s9.6 kbit/s93.75 kbit/s |
| Fieldbus interface, type | PROFIBUS |
| Max. cable length | 50 m system communication |
| Fieldbus interface, function | Incoming bus connection |
| Fieldbus interface, connection type | Plug |
| Fieldbus interface, connection technology | M12x1, B-coded as per EN 61076-2-101 |
| Fieldbus interface, number of poles/wires | 5 |
| Fieldbus interface, protocol | PROFIBUS DP-V1 |
| Fieldbus interface 2, connection type | Socket |
| Fieldbus interface 2, connection technology | M12x1, B-coded as per EN 61076-2-101 |
| Fieldbus interface 2, number of poles/wires | 5 |
| Fieldbus interface 2, function | Bus connection, forwarding |
| Fieldbus interface 2, type | PROFIBUS |
| Fieldbus interface 2, protocol | PROFIBUS DP-V1 |
| Fieldbus interface 2, galvanic isolation | yes |
| Fieldbus interface 2, transmission rate | 1.5 mbps12 mbps187.5 kbps19.2 kbps3 mbps500 kbps6 mbps9.6 kbps93.75 kbps |
| Communication interface, function | System communication XF20 OUT / XF21 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded as per EN 61076-2-114 |
| Communication interface, number of pins/wires | 4 |
| Communication interface, protocol | AP-COM |
| Communication interface, shielding | yes |
| Note on fieldbus interface | Terminating resistor on socket possible |
| Type of mounting | On H-rail with accessoriesWith through-hole |
| Note on materials | RoHS-compliant |
| Housing material | PAPCDie-cast zinc, nickel-plated |
| O-ring material | FPM |
Reviews
There are no reviews yet.