Fusor® 2200/2201 sealer/adhesive is a black, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation where bond strengths greater than the substrate are desired.
Fusor® 380NS/383NS adhesive is a two-component, rapid-cure epoxy adhesive system used to bond fiberglass reinforced plastics (FRP), sheet molded compounds (SMC) and metals.
LORD® 403 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
LORD® 406 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
LORD® 410 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
LORD® 459T adhesion enhancer/surface modifier is a primer in toluene solvent used for promoting adhesion to TPEs, TPOs & EPDM in conjunction with LORD acrylic, urethane, and epoxy structural adhesives, as well as with a variety of double-sided tapes.
LORD® 459X adhesion enhancer/surface modifier is a primer in xylene solvent used for promoting adhesion to TPEs, TPOs & EPDM in conjunction with LORD acrylic, urethane, and epoxy structural adhesives, as well as with a variety of double-sided tapes.
LORD® 606/6GB adhesive system creates strong bonds with excellent surface cure & minimal surface preparation. Fast-setting system bonds composites including DCPD resin & DCPD-based FRP and contains glass beads for precise control of bondline thickness.
LORD® 661/6GB acrylic adhesive system bonds composites including DCPD resin & DCPD-based FRP and contains glass beads for control of bondline thickness. It creates exceptionally strong bonds with excellent surface cure and minimal surface preparation.
LORD® 7542-A/B Black adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive will also bond primed metals.
LORD® 7542-A/B adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive will also bond primed metals.
LORD® 7542-A/C adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive will also bond primed metals.
LORD® 7542-A/D adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive will also bond primed metals.
LORD® 7545-A/B Black adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive also bonds primed metals and various combinations of dissimilar substrates.
LORD® 7545-A/B adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive also bonds primed metals and various combinations of dissimilar substrates.
LORD® 7545-A/C adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive also bonds primed metals and various combinations of dissimilar substrates.
LORD® 7545-A/D Black adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive also bonds primed metals and various combinations of dissimilar substrates.
LORD® 7545-A/D adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive also bonds primed metals and various combinations of dissimilar substrates.
LORD® 7545-A/E adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive also bonds primed metals and various combinations of dissimilar substrates.
LORD® 7545-A/F adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive also bonds primed metals and various combinations of dissimilar substrates.
LORD® 7545-A/G adhesive is an equal-mix, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation. This adhesive also bonds primed metals and various combinations of dissimilar substrates.
LORD® 7610DTM direct-to-metal adhesive/sealant is a single-component, moisture-cure product offering excellent adhesion to various substrates including many plastics, glass, concrete, wood and metals, especially precoated metals.
LORD® 7800-A/C adhesive is an equal-mix, urethane adhesive system used to bond composites, SMC and plastics with little surface preparation. Also bonds coated metals, such as powder-coated, primed and E-coat.
LORD® 7800-A/D adhesive is an equal-mix, urethane adhesive system used to bond composites, SMC and plastics with little surface preparation. Also bonds coated metals, such as powder-coated, primed and E-coat.
LORD® 810/20GB flexible acrylic adhesive system bonds ACM, various metals, and engineered plastics, and contains glass beads for precise control of bondline thickness. It delivers fast cure speed and strong bonding with minimal bondline read-through.
LORD® 852/25GB adhesive system replaces mechanical fastening methods. It performs well in low-temperature environments and applications subject to high impact, high peel loads or high fatigue. Glass beads allow precise control of bondline thickness.
LORD® Maxlok MX/T18 acrylic adhesive replaces welding, brazing, riveting and other mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads.
LORD® Maxlok MX/T3 acrylic adhesive replaces welding, brazing, riveting and other mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads.
Versilok® 253/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Glass beads are included in the adhesive system providing a mechanical lock between substrates.
Versilok® 253LGB/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Versilok 253LGB/254 adhesive contains a lower level of glass beads compared to other Versilok adhesives.
Versilok® 265/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Glass beads are included in the adhesive system. It also contains an odor suppressant.
Versilok® 271/331 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Glass beads are included in the adhesive system. It also contains an odor suppressant.
Versilok® 281/331 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Versilok 281/331 adhesive can be either room temperature cured or heat cured for faster processing.
LORD® Maxlok MX/T6 acrylic adhesive replaces welding, brazing, riveting and other mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads.
