Bent Axis Fixed Pumps - Series F2

Parker’s Seal-Lok Xtreme Metal Face Seal fittings and adapters achieve proven, leak-free connections in critical applications where elastomeric sealing is not an acceptable solution due to temperature or chemical concerns.

  • Pump Type:

    Piston, Fixed

  • Body Material:

    Aluminum

  • Configuration:

    Single

  • Maximum Displacement:

    68/68 cm3/rev, 4.15/4.15 inch3/rev

  • Maximum Operating Pressure:

    400 bar, 5800 psi

  • Maximum Flow Rate:

    112/112 L/min, 29.59 Gal/min

  • For Fluid Type:

    Standard Hydraulic Fluid

  • Media:

    Hydraulic

  • Maximum Operating Speed:

    2100 RPM

  • Minimum Fluid Temperature:

    -40 °C

  • Maximum Fluid Temperature:

    115 °C, 239 °F

  • Weight:

    19 kg, 41.8 lb

  • Shaft Type:

    ISO, DIN

  • Mounting Option:

    ISO

  • Port Connection:

    ISO, BSPP

  • Port Location:

    Rear Ports

  • Direction of Rotation:

    Clockwise, Counter Clockwise

  • Circuit Path:

    Open

  • Sensor Type:

    Consult Parker

  • Maximum Noise Level:

    Consult Parker

  • Drain Option:

    Yes

  • Filter Included:

    No

  • Radial Load Capacity:

    Consult Parker

  • Minimum Kinematic Viscosity:

    46 SUS, 10 cSt

  • Maximum Kinematic Viscosity:

    1853 SUS, 400 cSt

Parker’s hydraulic truck pump series F2 is a further development of the twin-flow version of series F1, the very first bent-axis truck pump on the market to feature two entirely independent flows. With a suitable build-up of the hydraulic system, the main advantage with a Twin-Flow Pump is that three different flows can be provided at the same engine speed. Featuring a Smart System Solution, F2 pumps provide circuit reliability at speeds up to 2100 rpm at 400 bar (5,800 psi). The F2 hydraulic pump is a very efficient and straight forward pump design with unsurpassed reliability. Its small envelope size gives a simple and inexpensive installation.

Rigorous product testing and continuous product development help to ensure our hydraulic pumps operate at optimum efficiency and can perform in the most demanding environments.

Markets:
• Mobile
• Transportation

Features/Benefits:
• Displacement from 43/41 – 68/68 cc – support various applications.
• Accessories for direct mount on Engine PTO – (Bypass-valve).
• 3 flows from 1 pump. 2 separate flows which can be combined.
• High selfpriming speeds – increased productivity.
• High overall efficiency – increased reliability.
• Low weight – low bending torque on PTO, easy to install.
• Laminated piston rings – low leakage resulting in more uptime.
• Installation above the reservoir level possible – flexibility in installation.
• Operating pressures up to 400 bar.
• Shaft end and mounting flange meet ISO standard.
• Small installation dimensions – fits wide range of applications.
• Tolerates low and high temperature shocks – suitable for the most demanding environments.

Applications:
• Forestry cranes
• Hook loaders / Lift dumpers
• Large truck loaders
• Tipper/crane combinations
• Refuse collecting vehicles
• Multipurpose vehicles

We have included in above configurator part numbers for our F2 hydraulic pump, please download our latest catalogue under Product Support for the latest information/updates or contact your local Parker Dealer for support.  

* Made in Sweden