Constructed of high quality, corrosion-resistant material and available in the widest selection of sizes, strokes and diameters available, Parker pneumatic cylinders, parts and kits offer unrivaled reliability and performance. The range of styles include standard and compact air cylinders, aluminum cylinders, guided cylinders, NFPA and ISO pneumatic cylinders, low profile pneumatic cylinders, tie rod pneumatic cylinders and stainless steel air cylinders.
The heavy duty pneumatic cylinder 10A-2 series. The bore size is φ32 to φ250. The main raw material is iron. Urethane dust wiper is used. The lSO 6430 standard has been adopted. (Excluding φ140 and φ180)
The 10S-6 series is available in 11 bore size at JIS B 8368-4. The cylinder is supplied in a choice of magnetic or non-magnetic function. This product offers very short axial dimensions.
10 bar Large Bore Pneumatic Cylinder 7AL-3 series equipped with wear resistant resin wear ring on the piston. A durable iron body is used, and 4 types of cylinder bore are available: φ280, φ320, φ360, and φ400.
Pneumatic cylinder 10A-6L series that securely locks the piston rod in an emergency with a safety lock mechanism. The tie rod construction guarantees long cylinder life with excellent design and quality without trouble.
Pneumatic cylinder 10B-6 series with brake mechanism that is ideal for intermediate stop and emergency stop measures. The tie rod construction guarantees long cylinder life with excellent design and quality without trouble.
10Z-3 Series are round body cylinders with stainless steel tube. This series is designed to withstand a wide range of operating environments to tolerate moisture and many types of lubricants and solvents.
Series DC7 heavy duty steel pneumatic cylinders offer advanced features like the strong scraper gland assembly, case hardened piston rods and high strength tie rods with rolled threads.
Thin type flat cylinder 10F-2 series is ideal for use at narrow space by narrowing width of cylinder with piston shaped oval. The switch is a system-up type that allows you to install a magnetic proximity switch later.
Compact pneumatic cylinder with guide 10G-2 series that pursues high accuracy, high rigidity, and ease of use. You can select from 2 model types according to the intended use. Non-rotation accuracy has been improved by integrating the guide.
Compact pneumatic cylinder with guide 10G-3 series that contributes to space saving of equipment. You can select from 2 model types according to the intended use.
Compact pneumatic cylinder 10S-1 series that is space-saving and easy to install. It is a disassembleable type that is convenient for maintenance and maintenance.
Compact pneumatic cylinder 10S-1R series equipped with a magnetic proximity switch. It is a disassembleable type that is convenient for maintenance, repair, and overhaul.
It is a compact pneumatic cylinder 10S-6RE series with a compact design that supports long strokes. Made-to-order specifications, it also supports rotation-less. Standard stroke is up to 300mm.
The BL6 rodless actuator in bore sizes Ø10 to Ø80mm is a linear actuator, guidance and control package designed into a modular system. Ideally suited for point-to point, reciprocating and simple traverse / transfer applications.
Oil-free magnetic rodless cylinder RL2 series with excellent holding capacity and space saving. The mounting space is extremely compact, about half that of a conventional cylinder.
Oil-free magnetic rodless cylinder RL3 series with excellent holding capacity and space saving. The mounting space is extremely compact, about half that of a conventional cylinder.
Air-Oil Unit AHU2-100 series that converts pneumatic pressure to hydraulic control and realizes stable speed control. The same control as hydraulic such as constant speed control and arbitrary stop is possible.
Air-Oil Unit AHU2-160 series that converts pneumatic pressure to hydraulic control and realizes stable speed control. The same control as hydraulic such as constant speed control and arbitrary stop is possible.
The 4MA is a ruggedly constructed all purpose cylinder. The aluminum body and end caps make the 4MA a light weight solution. With 8 bore sizes, 20 NFPA mounting styles, and a variety of specials and options it's highly configurable and easily adaptable.
SRD/SRDM Series are round body cylinders with Delrin® (acetal resin) heads and caps. This series is designed to withstand a wide range of operating environments to tolerate moisture and many types of lubricants and solvents.
The SR Series is a crimped, round body cylinder with a stainless steel tube and aluminum end caps.This series offers a wide variety of bore sizes and mounting applications to fit all different types of applications.
The P1P actuator in bore sizes Ø20 to Ø100mm is an ISO 21287 compact cylinder for standard temperature -20°C to +80°C with high and low temperature options suitable for processing, packaging and handling applications.
The OSP-P rodless actuator in bore sizes Ø10 to Ø80mm is a linear actuator, guidance and control package designed into a modular system. Ideally suited for point-to point, reciprocating and simple traverse / transfer applications.
P1F-L pneumatic cylinders are ISO 15552 and suitable for standard temperatures (-20 to +80°C). The dynamic rod lock allows the piston rod to be braked or locked in any position. They come available in bore sizes Ø32 to 125mm and strokes up to 2000mm.
P1F-T Series ISO 15552 tie-rod pneumatic cylinders are suitable for low to high temperatures. P1F-T Series has various piston rod material and wiper sealing options for a wide range of applications with bore sizes Ø32 to 125mm and strokes up to 2000mm.
P1F-S Series ISO 15552 pneumatic actuators are suitable for low, normal & high temperatures. Various piston rod material and wiper sealing options, bore sizes Ø32 to 125mm and strokes up to 2000mm, make P1F-S series fit a wide range of applications.
The VB actuator is a single acting pneumatic clamp cylinder with built in oleo pneumatic intensifier producing a force up to 2100 daN. Compact and easy to install for clamping, holding and riveting applications.
C0D thrust cylinder with diaphragm pistons are available in single and double acting variants for high force to size ratio applications such as clamping, riveting, punching. Forces up to 12000N.
The C05 actuator is available in double acting bores Ø12 to Ø63mm and C05S in single acting bores Ø8 to Ø63mm. With stainless steel piston rod as standard and corrosion resistant body is suitable for clamping and locking operations.
C0P thrust cylinders are linear actuators for a high force to size ratio. 8 versions including single and double acting, provide forces from 1600 to 25000N (at 6 bar). Suitable for clamping, riveting and punching applications. Strokes up to 100mm.
JAK Series, the air kncker cylinder, is a pneumatic piston type knocker (Shocker) generator.
The P1G actuator in bore sizes Ø6 to Ø16mm is a single acting cartridge cylinder for standard temperature -20°C to +80°C. A nickel plated brass threaded body offers corrosion protection. Suitable for light duty applications.
Tube size 16 to 40 mm, space saving. Magnetic transit design. Magnetic force transits the movement with piston side magnet and silder magnet. Stainless tube, light weighted and durable.
Parker P5TA Series, short stroke thruster twin guided cylinder, has high accuracy and high stiffness of positioning without out rotation by two guides. In addition, its compact and robust design gurantees long service life and low maintanance cost.
The P1D-BT Series cylinder is extention from P1D-B and the version with tie rod. P1D-BT series meets the specifications in the ISO 15552 standard. This means full interchangeability to any ISO 15552 cylinder anywhere around the globe.
The P1A actuator in bore sizes Ø10 to Ø25mm is a mini ISO 6432 cylinder for standard temperature -20°C to +80°C and high temperature -10°C to +150°C suitable for lighter duties in the packaging, food and textile industries.
The P1P actuator in bore sizes Ø20 to Ø100mm is an ISO 21287 compact cylinder for standard temperature -20°C to +80°C with high and low temperature options suitable for processing, packaging and handling applications.
The P1S actuator in bore sizes Ø10 to Ø63 mm is an ISO 6431 / ISO 6432 stainless steel cylinders with standard temperature of -20°C to +80°C and high temperature options.
The R Series actuator in bores Ø32 to Ø63mm is an aluminium round cylinder for standard temperature -10°C to +70°C. Lightweight and available with pneumatic cushioning providing an economical package for a variety of applications.
The P5T actuator in bore sizes Ø16 to Ø100 is a twin guided non rotating rod cylinder for standard temperature -20°C to +80°C. Available with plain or recirculating bearings and suitable for handling and packaging application.
9109 and SP series air bellows are high thrust single acting actuators with one, two or three convolutions. In bores Ø70 to Ø660mm and strokes 20 to 375mm in standard and high temperature versions for vibration damper applications.
The OSP-L rodless actuator in bore sizes Ø25 to Ø40mm is a linear actuator, guidance and control package designed into a modular system. Ideally suited for point-to point, reciprocating and simple traverse / transfer applications.
The OSP-P rodless actuator in bore sizes Ø10 to Ø80mm is a linear actuator, guidance and control package designed into a modular system. Ideally suited for point-to point, reciprocating and simple traverse / transfer applications.
Tube size 20 ~ 40 mm, space saving. Clean design with Stainless tube, light weighted and durable.
The GDC series, the tie rod cylinder, offers a wide range of bore sizes, multiple mounting configurations and auto switch capability as a standard.
PDC pin cylinder is available in spring return, spring extend, or double acting offer stainless steel tubing and stainless steel rods.
The P10S-7 series is available in 10 bore sizes from 12 mm to 100 mm and standard strokes from 5 mm to 100mm. The cylinder is supplied in a choice of magnetic or non-magnetic function.The non-magnetic version offers very short axial dimensions.
18 bar Heavy Duty Pneumatic Cylinders conforming to ANSI and NFPA. The tie rod construction sets the standard for performance, durability and trouble-free operation with superior design and quality to ensure long cylinder service life.
Series 2A/2AN heavy duty steel pneumatic cylinders offer advanced features like the Jewel rod gland assembly, adjustable floating cushions, case hardened piston rods and high strength tie rods with rolled threads. Compare and choose the Parker advantage.
Series MA and MAN industrial grade pneumatic cylinders have a no-compromise design and proven reliability and are the high performing, longer-lasting choice for your air cylinder applications.
Series SA stainless steel pneumatic tie rod cylinders combine corrosion resistance with proven reliability and are designed for use in harsh chemical washdown environments.
Series VE Pneumatic Cylinders provide a cost-effective solution for knife gate valve actuation, utilizing proven seal technology, the highest quality materials and stringent manufacturing standards.
Parker Custom Cylinders are purpose-built cylinders with unique features and no common standard or size. Cylinder assemblies and systems are our specialty - from the basic to the most complex.
P5E is a low profile, light weight, standard duty guided assembly, powered by ISO cylinders. The max operating pressure is 145 psi. Bore sizes are 32, 40, 50, 63, 80 & 100mm. Rod lock & oversize rod options are available.
The 2MNR cylinder is ruggedly constructed with a non-rotating piston design. The aluminum body and end caps make the 2MNR a light weight solution. With 6 bore sizes, 10 NFPA mounting styles, and a variety of options, the 2MNR is easily adaptable.
The C Series is a configurable general purpose legacy cylinder. The aluminum body and end caps make it a light weight solution. With 5 bore sizes, 7 mounting styles, and a variety of options, the C Series is adaptable to many applications.
HBC is a compact slide for standard duty linear motion, powered by NFPA or ISO cylinders. The max operating pressure is 250 psi (air), or 750 psi (oil). Bore sizes are 40, 50 & 63mm (1.5, 2, 2.5"). Rod lock & oversize rod options are available.
HBR is a reach slide for heavy duty linear motion, powered by NFPA or ISO cylinders. The max operating pressure is 250 psi (air), or 750 psi (oil). Bore sizes are 40, 50 & 63mm (1.5, 2, 2.5"). Rod lock & oversize rod options are available.
HBT is a thrust slide for heavy duty linear motion, powered by round, NFPA or ISO cylinders. The max operating pressure is 250 psi (air) or 750 psi (oil). Bore sizes are range from 20 to 63mm (.75 to 2.5"). Rod lock & oversize rod options are available.
The P1X has a low profile design to fit into spaces where height is a concern. The oval piston design creates high side loading capacity. Shock/Stroke adjusters are optional for applications that need mid stroke adjustment or dampening for high speeds.
P5T is an integral cylinder designed for standard to heavy duty short-stroke applications. The max operating pressure is 145 psi. Bore sizes range from 16-100mm with standard strokes from 10-200mm. Rod lock & oversize rod options are available.
The LP is a heavy duty tie-rod constructed compact cylinder. This space saving, inch-based option offers various special capabilities. The LPM Series is an available option when piston position sensing is required.
The P Series is a heavy-duty, repairable round cylinder. The aluminum body is hard anodized for corrosion and abrasion resistance. The retaining snap ring securely locks the head and cap in place. Easily removed for quick disassembly and repair.
The SRG is an all stainless-steel round cylinder. SRG comes standard with 303 stainless-steel heads, caps, and a 304 stainless piston rod on all bore sizes. A urethane rod wiper is also standard. A magnetic version is available for sensing options.
The C05 actuator is available in double acting bores Ø12 to Ø63mm and C05S in single acting bores Ø8 to Ø63mm. With stainless steel piston rod as standard and corrosion resistant body is suitable for clamping and locking operations.
The P1A actuator in bore sizes Ø10 to Ø25mm is a mini ISO 6432 cylinder for standard temperature -20°C to +80°C and high temperature -10°C to +150°C suitable for lighter duties in the packaging, food and textile industries.
The P1D family of ISO 15552 / VDMA magnetic profile and rod-tie cylinders offer an extensive range of environmental and application options and come in bore sizes Ø32 to Ø125mmm, offering strokes up to 2800mm.
The P1F Series in bore sizes Ø32 to 125mm is an ISO 15552 pneumatic cylinder suitable for standard, low & high temperatures. With various piston rod materials and wiper/rod sealing options for a wide range of applications. Strokes up to 2500 mm.
The P1F-T Series in bore sizes Ø32 to 125mm is an ISO 15552 Tie-Rod pneumatic cylinder suitable for standard, low & high temperatures. With various piston rod materials and rod sealing options for a wide range of applications. Strokes up to 2500 mm.
The heavy duty pneumatic Steel cylinder 10A-3 series. The bore size is φ50 to φ250. 10A-3 cylinders are more heavy duty type cylinders having thicker piston rods than those of 10A-2.
10 bar Pneumatic Cylinders conforming to ISO 6430. The tie rod construction sets the standard for performance, durability and trouble-free operation with superior design and quality to ensure long cylinder service life.
Series 2AJ and Series 2ANJ heavy duty steel pneumatic cylinders with Rod Lock prevent rod movement upon release of stored energy. They are rated for air service to 100 psi and can hold loads in excess of 5,000 lb., depending on bore size.
The P1F-T actuator in bore sizes Ø160 to 320mm is an ISO 15552 magnetic tie rod cylinder for standard temperature -20 to +80°C. The P1F-T has corrosion resistant materials and is suitable for heavy duty applications. Strokes up to 2000mm.
The P1F Series in bore sizes Ø32 to 100mm is a range of twin rods pneumatic cylinders suitable for use in non rotating applications like for handling and packaging.
The RDV series double acting, twin rod, non rotate, pneumatic linear actuators in bores Ø25 mm with adjustable pneumatic cushioning and magnetic piston for handling and packaging applications.
