Parker’s adhesives are designed to bond prepared aerospace-grade metals, plastics and composite materials. These products have a long history on being used on critical components and are manufactured in US-based plants.
Fusor® 309-1D/309-2D adhesive is a high performance, thixotropic, two-component epoxy adhesive system used for applications that require gap filling or non-sag characteristics on a vertical surface.
LORD® 306-1/306-2 epoxy adhesive system is used for applications that require gap filling or non-sag characteristics on a vertical surface. Conforms to military specification MIL-A-24456 for bonding plastic vibration damping tiles to steel.
LORD® 309-1D GB/309-2D epoxy adhesive system is for applications requiring gap filling or non-sag characteristics on vertical surface. Provides excellent adhesion to prepared metals & rubber, FRP, & wood. Glass beads allow control of bondline thickness.
LORD® 310-A/310-B adhesive system is used to bond many types of prepared metals, prepared rubber, urethane and plastics. Also used to bond disk drives, down-hole oil field equipment, automotive body panels and spoilers, and vibration damping mounts.
LORD® 3170-A/3170-B adhesive is an equal-mix, epoxy structural adhesive system used to bond metals, glass, reinforced plastics, ceramics and foam materials for cryogenic applications.
LORD® 403 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
LORD® 406 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
LORD® 410 acrylic adhesive in combination with LORD Accelerator 17, 19 or 19GB replaces welding, brazing, riveting & other mechanical fastening methods. It performs well in low-temperature applications that are subject to high impact or high peel loads.
LORD® 459T adhesion enhancer/surface modifier is a primer in toluene solvent used for promoting adhesion to TPEs, TPOs & EPDM in conjunction with LORD acrylic, urethane, and epoxy structural adhesives, as well as with a variety of double-sided tapes.
LORD® 459X adhesion enhancer/surface modifier is a primer in xylene solvent used for promoting adhesion to TPEs, TPOs & EPDM in conjunction with LORD acrylic, urethane, and epoxy structural adhesives, as well as with a variety of double-sided tapes.
LORD® 7450-A/B urethane adhesive system is designed for applications where the cured material will be exposed to cryogenic temperature environments. It provides a tough elastomeric polymer for use in diverse technologies.
LORD® 7701 adhesion enhancer/surface modifier is used on various vulcanized and thermoplastic polymeric materials to alter the surface of the rubber, making it more receptive to bonding. It is used in conjunction with a broad range of LORD adhesives.
LORD® 7713 adhesion enhancer/surface modifier is a single-component, room temperature curing primer used for adhesion bonding of glass reinforced polyester substrates.
