Increase the lifetime of automotive sealings and significantly contribute to passenger comfort by reducing squeak and itch noises. Parker LORD’s Sipiol® weatherstrip coatings and Autoseal® coatings are formulated to withstand challenging environments.
Fusor® 2200/2201 sealer/adhesive is a black, two-component urethane adhesive system used to bond FRP, SMC and other plastics with little surface preparation where bond strengths greater than the substrate are desired.
Fusor® 380NS/383NS adhesive is a two-component, rapid-cure epoxy adhesive system used to bond fiberglass reinforced plastics (FRP), sheet molded compounds (SMC) and metals.
Sipiol® WL 1025-21 coating is an aqueous, single-component, anti-friction coating designed for in-line application during production of automotive sealing systems. It is a high abrasion-resistant coating with a structured surface.
Sipiol® WL 1026-21 coating is an aqueous, single-component, anti-friction coating designed for in-line application during production of automotive sealing systems. It is a high abrasion-resistant coating with a micro-structured surface.
Sipiol® WL 1120-21 coating is a smooth, aqueous, single-component, anti-friction coating designed specifically for in-line application during production of automotive sealing systems.
Sipiol® WL 1120-23 coating is a smooth, aqueous, single-component, anti-friction coating designed specifically for in-line application during production of automotive sealing systems.
Sipiol® WL 1620-21 G coating is an aqueous, single-component, transparent glossy anti-friction coating used for in-line application during production of colored elastomers, such as o-rings.
Sipiol® WL 2010-23/WV 21 F coating is a smooth, aqueous, two-component anti-friction coating designed specifically for off-line application during production of automotive sealing systems. Addition of Sipiol WV 21 F curative is required.
Sipiol® WL 2010-24/WV 21 F coating is a smooth, aqueous, two-component anti-friction coating designed specifically for off-line application during production of automotive sealing systems. Addition of Sipiol WV 21 F curative is required.
Sipiol® WL 2015-22P/WV 21 F coating is an aqueous, two-component, anti-friction coating designed specifically for off-line application during production of automotive sealing systems. It is a high abrasion-resistant coating with a structured surface.
Sipiol® WP 8556 aqueous, heat-activated primer is designed for use under Sipiol and Autoseal anti-friction coatings to improve adhesion to extruded and cured EPDM profiles. Primer is compatible with coatings based on acrylics and polyurethanes.
Versilok® 253/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Glass beads are included in the adhesive system providing a mechanical lock between substrates.
Versilok® 253LGB/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Versilok 253LGB/254 adhesive contains a lower level of glass beads compared to other Versilok adhesives.
Versilok® 265/254 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Glass beads are included in the adhesive system. It also contains an odor suppressant.
Versilok® 271/331 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Glass beads are included in the adhesive system. It also contains an odor suppressant.
Versilok® 281/331 adhesive is a two-component, epoxy-modified acrylic adhesive used to bond a variety of automotive sheet metals. Versilok 281/331 adhesive can be either room temperature cured or heat cured for faster processing.
LORD® JMC-700K coating is a thermal-cure epoxy resin specially designed for thin film coating of heat sinks and magnets and provides electrical insulation, heat resistance, and oil resistance with a single coat application.
Sipiol® UV coating is a single-component, flexible, dielectric coating that cures in seconds. Provides comparable dielectric protection as PET film with minimal risk of delamination from the substrate.
