Three Way Valves B5D, 8D, 12D, 16D, 10G

Parker Sporlan Type 3 Way series valves primary purpose is to control automatically the flow of fluids, liquid or gas. Sporlan 3 Way Valves may be applied to divert flow of refrigerant in heat reclaim, reheat, or defrost applications.

  • Model Number:

    Please Configure Part for Model Number

  • Application:

    3-Way Hot Gas Defrost Valve, 3-Way Split Condenser Valve, 3-Way Heat Reclaim Valve, 3-Way Heat Reclaim Valve-HP

  • Product Type:

    10G, 12D, 16D, 8D, B5

  • Port Size:

    .625″ to 2″ or Not Applicable

  • Coil Type:

    MKC-1 *Not Included

  • Connection Size:

    Not Applicable, or 5/8 to 2-1/8 inch, N/A

  • Connection Type:

    ODF Solder

  • Pilot Port Type:

    Not Applicable, 1/4″ SAE or 1/4″ ODF

  • Connection 1 Size:

    Discharge 7/8″ or Not Applicable

  • Connection 2 Size:

    Suction 1-3/8″ or Suction 1-1/8″, Not Applicable

  • Connection 3 Size:

    Evaporator 1-3/8″ or Evaporator 1-1/8″, Not Applicable

  • Maximum Operating Pressure:

    31 to 45 bar

  • Maximum Pressure Rating:

    450 psi to 650 psi

  • Power Consumption:

    10 W

  • Modes of Control:

    N/A, BP- Single Condenser Mode-Energized, BP- Normal (Outside) Condenser- De-Energized, No BP- Normal (Outdoor) Condenser- De-Energized, No BP- Single Condenser- Energized

  • Input Voltage:

    24VAC/50-60Hz, 120VAC/50-60Hz or 208-240VAC/50-60Hz (120-208-240VAC – available at Additional Charge)

  • Solenoid Option:

    High Pressure or Not Applicable

  • Additional Options:

    Conduit Boss (No Additional Charge) or Junction Box (No Additional Charge)

  • Configuration:

    N/A

  • Function:

    N/A

  • Maximum Flow Rate:

    N/A

  • Maximum Operating Temperature:

    115.556

  • Minimum Operating Temperature:

    -40 °C

  • Mounting Type:

    Motor Assembly Above Horizontal °C

  • Actuation Type:

    Electrical

  • Body Material:

    Brass

  • Flow Rate:

    N/A

  • Seal Material:

    N/A

The Sporlan Type 3 Way series valves primary purpose is to control automatically the flow of fluids, liquid or gas. Parker Sporlan 3 Way Valves may be applied to divert flow of refrigerant in heat reclaim, reheat, or defrost applications.
The most common use is heat reclaim.  When the coil is de-energized the valve diverts refrigerant to the normal condenser.  When the coil is energized the valve diverts refrigerant to the reclaim condenser.  Two other applications are for split condensers and hot gas defrost. The B5D series are brass valves with extended copper connections.  The 8D, 12D, and 16D series valves are powder coated steel bodies with extended copper connections.  For Air Conditioning or refrigeration applications it is important to use system capacity, refrigerant, type of fluid, temperature and pressures.  It is not recommended to size by line size. Refer to literature or selection program for capacity data and details. Each valve is factory tested to ensure positive leak-free performance.

Markets:
• Air Conditioning
• Refrigeration
• Industrial Refrigeration
• Transportation

Features/Benefits:
• Class F coils
• E series has extended copper connections. Disassembly for installation is unnecessary
• 3 Way pilot eliminates costly low side leaks
• “B” type reduces install cost by eliminating the need for a solenoid valve on systems requiring idle condenser pump out.
• Mount in vertical or horizontal lines
• Synthetic seating material for tight closing
• Synthetic coated metal gaskets minimize external leaks
• Maximum working pressure for the (S)B5D series valves is 650 psi (45 bar),  For the (S)8D, (S)12D, and (S)16D it  is 450 psi (31 bar) and (S)8D-HP and (S)12D-HP it is 680 psi (47 bar)

Applications:
• Air Conditioning – Residential, Heat pumps, Chillers, Commercial units, Industrial
• Refrigeration – Freezers, Walkin units, Racks
• Industrial Refrigeration
• Transportation – Truck/Trailer, Containers

For over 80 years the Sporlan Division of Parker Hannifin has set the industry standard for the development and manufacture of leading edge HVACR components. Our outside technical sales force and application engineering team focuses on refrigeration system applications and troubleshooting for service technicians, distribution channel partners, and original equipment manufacturers.