| Dimensions W x L x H | 42.2 mm x 125.8 mm x 76.5 mm |
| Width dimension | 18.9 mm |
| Diagnostics via LED | Bus errorForce modePower supply for electronics/sensorsLoad power supplySystem fault |
| Diagnostics via bus | Wire breakShort circuitParameterization errorBuffer overflowUpper limit value violatedTransmission errorLower limit value not complied withUndervoltageWatchdog/I/O statusRequested function not supportedNot ready for data exchange |
| Configuration support | GSD file |
| Max. number of modules | 10 |
| System parameter | Diagnostic memoryFail-safe responseForce modeSystem start |
| Module parameters | Undervoltage diagnosticsAnalog module process value representation |
| Control elements | DIL switch |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 75 mA |
| Max. power supply | 8 A |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Power failure buffering | 20 ms |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Power supply, function | Electronics and sensors |
| Power supply, type of connection | Terminal strip |
| Power supply, connection technology | Spring-loaded terminal |
| Power supply, number of pins/wires | 4 |
| Power supply, connection pattern | 00995847 |
| Power supply, conductor diameter | 0.2 mm² … 1.5 mm² |
| Power supply, information on conductor diameter | 0.2 – 2.5 mm² for flexible conductors without cable end sleeves |
| Certification | RCM compliance markc UL us – Listed (OL) |
| KC characters | KC EMC |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| Certificate issuing authority | UL E239998 |
| Vibration resistance | Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class (CRC) | 0 – No corrosion stress |
| Storage temperature | -20 °C … 70 °C |
| Relative air humidity | 95 %Non-condensing |
| Protection against direct and indirect contact | PELV |
| Degree of protection | IP20 |
| Ambient temperature | -5 °C … 50 °C |
| Note on ambient temperature | -5 – 60 °C for vertical installation |
| Product weight | 145 g |
| Max. address capacity outputs | 64 byte |
| Note on outputs | 62 bytes with I/O diagnostic interface64 bytes with status bits64 bytes without diagnostics |
| Max. address capacity inputs | 64 byte |
| Information on inputs | 62 bytes with I/O diagnostic interface63 bytes with status bits64 bytes without diagnostics |
| Fieldbus interface, galvanic isolation | yes |
| Fieldbus interface, transmission rate | 1.5 Mbit/s12 Mbit/s187.5 kbit/s19.2 kbit/s3 Mbit/s500 kbit/s6 Mbit/s9.6 kbit/s93.75 kbit/s |
| Fieldbus interface, type | PROFIBUS |
| Fieldbus interface, function | Bus connection, incoming/forwarding |
| Fieldbus interface, connection type | Socket |
| Fieldbus interface, connection technology | Sub-D |
| Fieldbus interface, number of poles/wires | 9 |
| Fieldbus interface, protocol | PROFIBUS DP |
| Fieldbus interface, connection pattern | 00995638 |
| Fieldbus interface, max. address volume for inputs | 64 byte |
| Fieldbus interface, max. address volume for outputs | 64 byte |
| Service interface, function | Diagnostics and parameterization |
| Service interface, connection type | Socket |
| Service interface, connection technology | USB 2.0 type B, mini |
| Service interface, number of poles/wires | 5 |
| Service interface, connection pattern | 00995868 |
| Type of mounting | With H-rail |
| Note on materials | Contains paint-wetting impairment substancesRoHS-compliant |
| Housing material | PA |
Reviews
There are no reviews yet.