| Dimensions W x L x H | 30 mm x 170 mm x 35 mm |
| Diagnostics via LED | Diagnostics per channelDiagnostics per moduleLoad power supplyStatus per channelStatus per module |
| Diagnose per internal communication | IO-Link® eventShort circuit/overload in sensor supplyElectronics/sensors overvoltageLoad overvoltageElectronics/sensors undervoltageLoad undervoltage |
| Reverse polarity protection | yes |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 55 mA |
| Intrinsic current consumption at nominal operating voltage load | Typically 5 mA |
| Note regarding operating voltage | SELV/PELV fixed power supplies requiredNote voltage drop |
| Max. power supply | 2 x 4 A (external fuse required) |
| Nominal operating voltage DC for electronics/sensors | 24 V |
| Nominal operating voltage DC load | 24 V |
| Power failure buffering | 10 ms |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Permissible voltage fluctuations load | ± 25 % |
| Power supply, function | Incoming electronics/sensors and load |
| Power supply, type of connection | Plug |
| Power supply, connection technology | M8x1, A-coded as per EN 61076-2-104 |
| Power supply, number of pins/wires | 4 |
| Voltage forwarding, function | Outgoing electronics/sensors and load |
| Voltage forwarding, connection type | Socket |
| Voltage forwarding, connection technology | M8x1, A-coded as per EN 61076-2-104 |
| Voltage forwarding, number of pins/wires | 4 |
| Certification | RCM compliance mark |
| KC characters | KC EMC |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC |
| Corrosion resistance class (CRC) | 1 – Low corrosion stress |
| Storage temperature | -40 °C … 70 °C |
| Relative air humidity | 5 – 95 %Non-condensing |
| Degree of protection | IP65IP67 |
| Note on degree of protection | Unused connections sealed |
| Ambient temperature | -20 °C … 50 °C |
| Product weight | 126 g |
| Protocol | IO-Link® |
| IO-Link®, protocol version | Master V 1.1 |
| IO-Link®, communication mode | Configurable via softwareSIO, COM1 (4.8 kBd), COM2 (38.4 kBd), COM3 (230.4 kBd) |
| IO-Link®, port class | B |
| IO-Link®, number of ports | 4 |
| IO-Link®, process data width OUT | 8–128 bytes parameterizable |
| IO-Link®, process data width IN | 12–132 bytes parameterizable |
| IO-Link®, minimum cycle time | Depends on minimally supported cycle time of connected IO-Link® device |
| Max. cable length | 20 m for IO-Link® operation50 m system communication |
| IO-Link®, communication | C/Q LED green |
| Communication interface, function | System communication XF10 IN / XF20 OUT |
| Communication interface, connection type | 2x socket |
| Communication interface, connection technology | M8x1, D-coded as per EN 61076-2-114 |
| Communication interface, number of pins/wires | 4 |
| Communication interface, protocol | AP-COM |
| Communication interface, shielding | yes |
| Electrical IO-Link® connection, connection type | 4x socket |
| Electrical connection, IO-Link®, connection technology | M12x1, A-coded as per EN 61076-2-101 |
| Electrical IO-Link® connection, number of pins/wires | 5 |
| Type of mounting | On H-rail with accessoriesWith through-hole |
| Note on materials | RoHS-compliant |
| Housing material | PAPCDie-cast zinc, nickel-plated |
| O-ring material | FPM |
Reviews
There are no reviews yet.