PM1105

Description

Product characteristics

Number of inputs and outputs

Number of analogue outputs: 1

Measuring range

-1…4 bar

-14.5…58 psi

-100…400 kPa

Process connection

Clamp DN25…DN40 (1…1,5″) DIN 32676 (ISO 2852)

Application

Special feature

Gold-plated contacts

Measuring element

ceramic-capacitive pressure measuring cell

Temperature monitoring

Application

flush mountable for the food and beverage industry

Media

viscous media and liquids with suspended particles; liquids and gases

Medium temperature [°C]

-25…150

Min. bursting pressure

100 bar

1450 psi

10000 kPa

Pressure rating

30 bar

435 psi

3000 kPa

Note on pressure rating

take into account the pressure resistance of the bracket and the seal used for clamp connection

Vacuum resistance [mbar]

-1000

Type of pressure

relative pressure; vacuum

No dead space

yes

MAWP (for applications according to CRN) [bar]

Electrical data

Operating voltage [V]	18…30 DC
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Integrated watchdog	yes

2-wire

Current consumption [mA]	3.5…21.5
Power-on delay time [s]	1

3-wire

Current consumption [mA]	< 45
Power-on delay time [s]	0.5

Inputs / outputs

Number of inputs and outputs	Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	analogue signal; IO-Link; (configurable)
Number of analogue outputs	1
Analogue current output [mA]	4…20; (scalable)
Max. load [Ω]	700; (Ub = 24 V; (Ub – 9 V) / 21.5 mA)
Short-circuit proof	yes
Overload protection	yes

Measuring/setting range

Measuring range

-1…4 bar

-14.5…58 psi

-100…400 kPa

Analogue start point

-1…3.2 bar

-14.5…46.4 psi

-100…320 kPa

Analogue end point

-0.2…4 bar

-2.9…58 psi

-20…400 kPa

In steps of

0.002 bar

0.05 psi

0.2 kPa

Factory setting

ASP		0.0 bar
AEP		4.0 bar

Accuracy / deviations

Repeatability [% of the span]

< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)

Characteristics deviation [% of the span]

< ± 0,2; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1)

Linearity deviation [% of the span]

< ± 0,15; (Turn down 1:1)

Hysteresis deviation [% of the span]

< ± 0,15; (Turn down 1:1)

Long-term stability [% of the span]

< ± 0,1; (Turn down 1:1; per year)

Temperature coefficient zero point [% of the span / 10 K]

< ± 0,05

Temperature coefficient span [% of the span / 10 K]

< ± 0,15

Total deviation over temperature range

Temperature range	total deviation
-25…15 °C	Characteristics deviation ± 0,1 % der Spanne / 10 K
15…80 °C	Characteristics deviation
80…150 °C	Characteristics deviation ± 0,05 % der Spanne / 10 K

Notes on the accuracy / deviation

for further details see section Diagrams and graphs

Response times

Damping for the analogue output dAA [s]	0…4

2-wire

Step response time analogue output [ms]	30

3-wire

Step response time analogue output [ms]	7

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

Profiles

Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000)

SIO mode

Required master port type

Process data analogue

Min. process cycle time [ms]

3.2

Supported DeviceIDs

Type of operation	DeviceID
Default	664

Operating conditions

Ambient temperature [°C]	-25…80
Storage temperature [°C]	-40…100
Protection	IP 67; IP 68; IP 69K

Tests / approvals

EMC

DIN EN 61000-6-2
DIN EN 61000-6-3

Shock resistance

DIN EN 60068-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

20 g (10…2000 Hz)

MTTF [years]

323

Note on approval

factory certificate available as download at www.factory-certificate.ifm

UL approval

UL Approval no.	J055
File number UL	E174189

Mechanical data

Weight [g]	392.55
Materials	stainless steel (1.4404 / 316L); PBT
Materials (wetted parts)	ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE
Min. pressure cycles	100 million
Process connection	Clamp DN25…DN40 (1…1,5″) DIN 32676 (ISO 2852)