SD6100

Description

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Process connection	threaded connection R 1/2 DN15

Measuring range [m³/h]	0.4…122

CO2

Measuring range [m³/h]	0.2…74.7

Measuring range [m³/h]	0.2…75

Application

Application	for industrial applications
Media	Argon (Ar); carbon dioxide (CO2); nitrogen (N2)
Medium temperature [°C]	0…60
Pressure rating [bar]	16
Pressure rating [Mpa]	1.6

Electrical data

Operating voltage [V]	18…30 DC; (to SELV/PELV)
Current consumption [mA]	< 100
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	1

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; pulse signal; IO-Link; (configurable)
Electrical design	PNP
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250; (per output)
Number of analogue outputs	1
Analogue current output [mA]	4…20; (scalable)
Max. load [Ω]	500
Pulse output	consumed quantity meter
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Low flow cut-off LFC [m³/h]	< 1.3
Measuring dynamics	1:300

Measuring range [m³/h]	0.4…122
Display range [m³/h]	0…146.4
Resolution [m³/h]	0.1
Set point SP [m³/h]	1.1…122
Reset point rP [m³/h]	0.6…121.5
Analogue start point ASP [m³/h]	0…97.6
Analogue end point AEP [m³/h]	24.4…122
In steps of [m³/h]	0.1

CO2

Measuring range [m³/h]	0.2…74.7
Display range [m³/h]	0…89.7
Resolution [m³/h]	0.1
Set point SP [m³/h]	0.7…74.7
Reset point rP [m³/h]	0.4…74.4
Analogue start point ASP [m³/h]	0…59.8
Analogue end point AEP [m³/h]	14.9…74.7
In steps of [m³/h]	0.1

Volumetric flow quantity monitoring

Pulse value	0.001…1 000 000 m³
In steps of	0.001…1000 m³
Pulse length [s]	0,012…2

Measuring range [m³/h]	0.2…75
Display range [m³/h]	0…90
Resolution [m³/h]	0.1
Set point SP [m³/h]	0.7…75
Reset point rP [m³/h]	0.4…74.7
Analogue start point ASP [m³/h]	0…60
Analogue end point AEP [m³/h]	15…75
In steps of [m³/h]	0.1

Temperature monitoring

Measuring range [°C]	0…60
Display range [°C]	-12…72
Resolution [°C]	0.2
Set point SP [°C]	0.4…60
Reset point rP [°C]	0…59.8
Analogue start point [°C]	0…48
Analogue end point [°C]	12…60
In steps of [°C]	0.2

Accuracy / deviations

Flow monitoring

Repeatability [% of the measured value]	± 1,5
Accuracy (in the measuring range)	± (6 % MW + 0,6 % MEW); (conditions: installation to DIN ISO 2533; installation in pipes: DN15)

Temperature monitoring

Accuracy [K]	± 2; (medium flow in the limit area of the flow measurement range)

Response times

Flow monitoring

Response time [s]	0.1; (dAP = 0)
Damping process value dAP in steps [s]	0 – 0,2 – 0,4 – 0,6 – 0,8 – 1

Software / programming

Parameter setting options	Flow monitoring; quantity meter; Preset counter; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; medium selection

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

Profiles

Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

4.1

Supported DeviceIDs

Type of operation	DeviceID
Default	265

Operating conditions

Ambient temperature [°C]	0…60
Storage temperature [°C]	-20…85
Max. relative air humidity [%]	90
Protection	IP 65

Tests / approvals

EMC

EN 61000-4-2 ESD	4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated	10 V/m
EN 61000-4-4 Burst	2 kV
EN 61000-4-6 HF conducted	10 V

CPA approval

model number	003TG
accuracy class	–
maximum allowable error	± 7 % FS
Q (min)	0,2 m³/h (N2)
	0,2 m³/h (CO2)
	0,4 m³/h (Ar)
Q (t)	–
Q (max)	75 m³/h (N2)
	74,7 m³/h (CO2)
	122 m³/h (Ar)

Vibration resistance

DIN IEC 68-2-6

5 g (55…2000 Hz)

MTTF [years]

227

Pressure Equipment Directive

Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight [g]	963.5
Materials	PBT-GF20; PC; PC; stainless steel (1.4301 / 304); FKM
Materials (wetted parts)	stainless steel (1.4301 / 304); ceramics glass passivated; PEEK; polyester; FKM; aluminium anodised
Tightening torque [Nm]	50
Process connection	threaded connection R 1/2 DN15

Displays / operating elements

Display

Display unit	4 x LED, green (Nl/min, Nm³/h, Nm³, °C)
function display	1 x LED, yellow
switching status	2 x LED, yellow
measured values	alphanumeric display, 4-digit
programming	alphanumeric display, 4-digit