$1.068,70
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
|---|---|
| Process connection | threaded connection 1/2″ NPT DN15 |
| Measuring range |
|
|---|
| Measuring range |
|
|---|
| Measuring range |
|
|---|
| Application | for industrial applications |
|---|---|
| Media | Argon (Ar); carbon dioxide (CO2); nitrogen (N2) |
| Medium temperature [°F] | 32…140 |
| Pressure rating [bar] | 16 |
| Pressure rating [psi] | 232 |
| MAWP (for applications according to CRN) [bar] | 16 |
| Operating voltage [V] | 18…30 DC; (to SELV/PELV) |
|---|---|
| Current consumption [mA] | < 100 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 1 |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
|---|
| Total number of outputs | 2 |
|---|---|
| Output signal | switching signal; analogue signal; pulse signal; IO-Link; (configurable) |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250; (per output) |
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4…20; (scalable) |
| Max. load [Ω] | 500 |
| Pulse output | consumed quantity meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Low flow cut-off LFC |
|
|||
|---|---|---|---|---|
| Measuring dynamics | 1:300 |
| Pulse value | 0.040…4 000 000 scf |
|---|---|
| In steps of | 0.020…1000 scf |
| Pulse length [s] | 0,007…2 |
| Measuring range |
|
|||
|---|---|---|---|---|
| Display range |
|
|||
| Resolution |
|
|||
| Set point SP |
|
|||
| Reset point rP |
|
|||
| Analogue start point ASP |
|
|||
| Analogue end point AEP |
|
|||
| In steps of |
|
| Measuring range |
|
|||
|---|---|---|---|---|
| Display range |
|
|||
| Resolution |
|
|||
| Set point SP |
|
|||
| Reset point rP |
|
|||
| Analogue start point ASP |
|
|||
| Analogue end point AEP |
|
|||
| In steps of |
|
| Measuring range |
|
|||
|---|---|---|---|---|
| Display range |
|
|||
| Resolution |
|
|||
| Set point SP |
|
|||
| Reset point rP |
|
|||
| Analogue start point ASP |
|
|||
| Analogue end point AEP |
|
|||
| In steps of |
|
| Measuring range [°F] | 32…140 |
|---|---|
| Display range [°F] | 10.5…161.5 |
| Resolution [°F] | 0.5 |
| Set point SP [°F] | 32.5…140 |
| Reset point rP [°F] | 32…139.5 |
| Analogue start point [°F] | 32…118.5 |
| Analogue end point [°F] | 53.5…140 |
| In steps of [°F] | 0.5 |
| Repeatability [% of the measured value] | ± 1,5 |
|---|---|
| Accuracy (in the measuring range) | ± (6 % MW + 0,6 % MEW); (conditions: installation to DIN ISO 2533; installation in pipes: DN15) |
| Accuracy [K] | ± 2; (medium flow in the limit area of the flow measurement range) |
|---|
| Response time [s] | 0.1; (dAP = 0) |
|---|---|
| Damping process value dAP in steps [s] | 0 – 0,2 – 0,4 – 0,6 – 0,8 – 1 |
| Parameter setting options | Flow monitoring; quantity meter; Preset counter; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; medium selection |
|---|
| Communication interface | IO-Link | ||||
|---|---|---|---|---|---|
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 | ||||
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis | ||||
| SIO mode | yes | ||||
| Required master port type | A | ||||
| Process data analogue | 3 | ||||
| Process data binary | 2 | ||||
| Min. process cycle time [ms] | 4.1 | ||||
| Supported DeviceIDs |
|
| Ambient temperature [°F] | 32…140 |
|---|---|
| Storage temperature [°F] | -4…185 |
| Max. relative air humidity [%] | 90 |
| Protection | IP 65 |
| EMC |
|
|---|
Reviews
There are no reviews yet.