| Valve function | 3-way proportional pressure control valve |
| Structural design | Piston gate valvewith integrated pressure sensors |
| Type of control | Direct |
| Actuation type | Electrical |
| Reset method | Magnetic spring |
| Flow direction | Non-reversible |
| Mounting position | Any |
| Sealing principle | Hard |
| Nominal width | 6 mm |
| Short-circuit protection | yes |
| Display type | LED |
| Standard nominal flow rate | 725 l/min |
| Operating pressure | 0.4 MPa … 0.8 MPa |
| Operating pressure | 4 bar … 8 bar |
| Typical lowering speed | 15 mm/s |
| Note on lowering speed | When manual exhausting is actuated with cylinder diameter 80 mm, transmission ratio 1:1 and 100 kg load. |
| Ambient temperature | 0 °C … 50 °C |
| Operating medium | Compressed air as per ISO 8573-1:2010 [6:4:4] |
| Information on operating and pilot media | Operation with oil lubrication not possibleMaximum particle size 5 µm |
| Degree of protection | IP65 |
| Note on degree of protection | In mounted state |
| Certification | RCM compliance mark |
| KC characters | KC EMC |
| CE marking (see declaration of conformity) | As per EU EMC directiveAs per EU RoHS directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMCTo UK RoHS instructions |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Note on materials | RoHS-compliant |
| Vibration resistance | Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class (CRC) | 1 – Low corrosion stress |
| Application note | The product is suitable for industrial purposes only. Radio interference suppression measures may be required in residential areas. |
| Nominal operating voltage DC | 24 V |
| DC operating voltage range | 21.6 V … 26.4 V |
| Residual ripple | 5 % |
| Max. current consumption | 1.2 A |
| Current consumption | 120 mA |
| Reverse polarity protection | for operating voltage |
| Duty cycle | 100% |
| Max. electrical power consumption | 33.5 W |
| Diagnostic function | Indication via LED |
| Max. cable length | 30 m |
| Fieldbus interface, connection type | Plug |
| Fieldbus interface, connection technology | M12x1, A-coded as per EN 61076-2-101 |
| Fieldbus interface, number of poles/wires | 5 |
| Fieldbus interface, protocol | CAN bus with Festo protocol |
| Electrical connection for actuator, connection type | Socket |
| Electrical actuator connection, connection technology | M12x1 A-coded as per EN 61076-2-101 |
| Electrical actuator connection, number of pins/wires | 8 |
| Pneumatic valve electrical connection, connection type | Plug |
| Electrical pneumatic valve connection, connection technology | Connection diagram form C as per industrial standard, 9.4 mm |
| Electrical pneumatic valve connection, number of pins/wires | 2 |
| Type of mounting | Direct fastening via M5 thread |
| Pneumatic connection 1 | G3/8 |
| Pneumatic connection 2 | G3/8 |
| Pneumatic connection 3 | G3/8 |
| Pneumatic connection for control component | G1/8 |
| Product weight | 1550 g |
| Housing material | Wrought aluminum alloy, anodized |
| Seals material | FPMHNBRNBR |
Reviews
There are no reviews yet.