SA4110

Description

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Process connection	diameter Ø 8 mm

Application

Special feature

Gold-plated contacts

Media

water; glycol solutions; air; oils

Note on media

low-viscosity oils with viscosity: ≤ 40 mm²/s (104 °F)

high-viscosity oils with viscosity: > 40 mm²/s (104 °F)

Medium temperature [°F]

-4…212

Pressure rating [bar]

Pressure rating [psi]

725

MAWP (for applications according to CRN) [bar]

Electrical data

Operating voltage [V]	18…30 DC
Current consumption [mA]	< 100
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	10

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; frequency signal; IO-Link; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2.5
Permanent current rating of switching output DC [mA]	250
Number of analogue outputs	1
Analogue current output [mA]	4…20; (scalable)
Max. load [Ω]	350
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes
Frequency of the output [Hz]	0…1000

Measuring/setting range

Probe length L [mm]	100
Operating mode	relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended; Factory setting: relative)

Temperature monitoring

Measuring range [°F]	-4…212
Resolution [°F]	0.5

Liquid media – absolute operating mode

Setting range [ft/s]	0…9.85
Greatest sensitivity [ft/s]	0.15…9.85

Liquid media – relative operating mode

Setting range [ft/s]	0…19.5
Greatest sensitivity [ft/s]	0.15…9.85

Gases – operating mode “absolute”

Setting range [ft/s]	0…328
Greatest sensitivity [ft/s]	6…328

Gases – operating mode “relative”

Setting range [ft/s]	0…656
Greatest sensitivity [ft/s]	6…328

Accuracy / deviations

Temperature drift [cm/s x 1/K]	0,01 fps x 1/K (< 68 °F; > 158 °F)
Temperature gradient [K/min]	100

Absolute operating mode

Repeatability	0,05 m/s; (water; flow velocity: 0,05…3 m/s)

Relative operating mode

Accuracy	± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 68…158 °F; inlet length: 5 ft; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
Repeatability	0,05 m/s; (water; flow velocity: 0,05…3 m/s)

Temperature monitoring

Temperature drift	± 0,003 K/°F
Accuracy [K]	± 0,3 / ± 1; (water; flow velocity: 1…9,85 fps / air; flow velocity: > 32,8 fps)

Response times

Response time [s]	0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)

Temperature monitoring

Dynamic response T05 / T09 [s]	1,5 (T09); (water; flow velocity: 1…9,85 fps)

Software / programming

Parameter setting options	hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

Profiles

Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

Supported DeviceIDs

Type of operation	DeviceID
Factory setting / ModE = (REL)	537
ModE = (LIQU)	544
ModE = (GAS)	551

Operating conditions

Ambient temperature [°F]	-40…176
Storage temperature [°F]	-40…212
Protection	IP 65; IP 67

Tests / approvals

EMC

DIN EN 60947-5-9

Shock resistance

DIN EN 60068-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

5 g (10…2000 Hz)

MTTF [years]

143

UL approval

UL Approval no.	I017
File number UL	E174189

Mechanical data

Weight [g]	296.5
Materials	stainless steel (1.4404 / 316L); PBT-GF20; PBT-GF30
Materials (wetted parts)	stainless steel (1.4404 / 316L)
Process connection	diameter Ø 8 mm