TCC231

Description

Product characteristics

Number of inputs and outputs

Number of digital outputs: 1; Number of analogue outputs: 1

Measuring range

-25…160 °C

-13…320 °F

Process connection

diameter Ø 6 mm

Installation length EL [mm]

100

Application

Special feature	Gold-plated contacts
Measuring element	1 x Pt 1000
Reference element	1 x NTC
Media	liquids and gases
Pressure rating [bar]	160

Electrical data

Operating voltage [V]	18…32 DC; (“supply class 2” to cULus)
Current consumption [mA]	10; (24 V)
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	6
Integrated watchdog	yes

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 1; Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	analogue signal; IO-Link; calibration check status
Electrical design	PNP/NPN
Number of digital outputs	1
Output function	normally closed; (diagnostic signal)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	100
Diagnostic output	calibration check status and error diagnostics
Number of analogue outputs	1
Analogue current output [mA]	4…20
Max. load [Ω]	(Ub – 15 V) x 50
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range

-25…160 °C

-13…320 °F

Note on measuring range

scalable

Factory setting

-10…150 °C / 14…302 °F

Calibration check limit [K]

0.5…3

In steps of [K]

0.05

Resolution

Resolution of analogue output [K]	0.05

Accuracy / deviations

Precision analogue output [K]	± 0,2
Precision IO-Link [K]	± 0,2
Temperature coefficient analogue output [% of the span / 10 K]	< ± 0,02; (in case of deviation from the reference condition 25 ± 5 °C)
Temperature coefficient IO-Link [% of the span / 10 K]	< ± 0,01; (in case of deviation from the reference condition 25 ± 5 °C)

Response times

Dynamic response T05 / T09 [s]	1,5 / 4

Software / programming

Parameter setting options	Display unit; scaling of the analogue output; calibration check limit; switching logic diagnostic output; simulation mode

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9 CDV

Profiles

Digital Measuring Sensor, Common Profile, Blob Transfer

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

4.4

IO-Link resolution temperature [K]

0.01

Supported DeviceIDs

Type of operation	DeviceID
Default	1129

Operating conditions

Ambient temperature [°C]

-25…70

Note on ambient temperature

max. internal device temperature: 125 °C

Storage temperature [°C]

-40…100

Protection

IP 68; IP 69K

Tests / approvals

EMC

DIN EN 61000-6-2
DIN EN 61000-6-3

Shock resistance

DIN EN 68000-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

35 g (10…2000 Hz)

MTTF [years]

329

Note on approval

factory certificate available as download at www.factory-certificate.ifm

UL approval

UL Approval no.	K021
File number UL	E217884

Mechanical data

Weight [g]	275.6
Dimensions [mm]	Ø 50 / L = 143.5
Materials	stainless steel (1.4404 / 316L); PEI; FKM; PFA
Materials (wetted parts)	stainless steel (1.4404 / 316L); PEEK
Process connection	diameter Ø 6 mm
Surface characteristics Ra/Rz of the wetted parts	Ra: < 0.8
Probe diameter [mm]	6
Installation length EL [mm]	100